|
|
Brief
|
- Bi-Directional converter for Serial ATA and Parallel ATA. This Adapter Does-it-All, SATA Hard Drive to IDE Converter or IDE Hard Drive to SATA Host Converter.
- This is a bi-direction converter for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller.
- The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0.This converter supports 1.5GHz data rate.
|
|
Features
|
- Jmicro JM20330 Chipset
- Plug & Play and Hot-swapping capability
- 150MB/s transfer rate
- Automatic SATA 3.0/1.5 Gbps speed negotiation
- Serial-ATA 1.0 specification compliant
- Support Serial ATA hot-plug
- Support ATA Host Bridge
- Support ATA PIO and UDMA modes 0 to 4
- ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s
- ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count
- Support 3.5” IDE hard drives and 5.25” optical drives
- Ultra low power consumption
- Work for both AC and DC couple between the transmitter and the receiver
- Provide specified OOB signal detection and transmission
- Support Spread Spectrum Clocking to reduce EMI
- Support Partial/Slumber power management
- Provide adjustable TX signal amplitude and pre-emphasis level
- Master/Slave mode support
- Support Windows 98SE/ME/2000/XP/Vista Operating System
|
|
Included
|
- Includes Bi-directional Adaptor, SATA Cable, Power Cable, CD Driver, and User manual.
|
|
Model
|
|
Model
|
Chip set
|
|
SY-BIR-IDESA
|
|
|
|
Related Link
|
   |
|
|
|
|
|
))
))
))
